Performance Monster 22.5 Mm Rolls Per SF

1. Shock and sound absorbent
2. Fade resistant
3. Wears well
4. Slip resistant wet or dry
5. Indoor only
6. Cardio, light weights, moderate weights, strength equipment and extreme weights
7. Tracks, funtional training, extreme funtional training

22.5mm (2.5mm+8mm/12mm) x 48 inch Rolls. Priced by the square foot in 4 foot widths.

Stacked Performance Monster Roll With itstru-8 Technology, 12mm 4735 Base Layer, installed under an 8mm -8032 recycled rubber, which is fusion, bonded to a 2.5mm Surface Wear Layer. Total system thickness of approximately 22.5mm.

With a durable wear layer made to resists the scuffing and marking that is common in strength and conditioning applications. Performance Monster can sustain endless sets of power cleans and help your legs survive endless box jumps. This 22.5mm triple durometer system designed for extreme strength and conditioning. The 12 mm base is install separately diagonal to the top layer. This triple system combines the durability and firm footing desired in strength training with the ergonomic demands of aggressive functional training in one surface.

Recycled rubber is a growing category for fitness flooring within the flooring industry and continues to increase in popularity as a practical solution for fitness applications. Performance Monster combines recycled rubber backing with colorful rubber wear layers. The result is a multi-functional high performance floor that is durable and easy to clean. In addition, the overall comfort of recycled rubber flooring provides improved ergonomics, acoustical benefits, and shock absorption, making it ideal for fitness centers, health clubs, and more.

Recycled rubber flooring is on the rise because of its positive environmental attributes. Benefits, such as high-recycled content, low-VOC emissions, and low life-cycle costs, make it an environmentally preferable flooring solution for a number of applications.

Performance Monster Rolls are manufactured from recycled materials and slight variance in shade and color chip dispersion is normal. It is the installer’s responsibility to inspect all products to insure the correct style, thickness, and color. Any moderate to severe discrepancies should be reported immediately before beginning the installation.

Coverage of 70 – 75 sq ft per gallon of EGrip III when applied to 12 mm base layer.

Monster:

Performance Criteria

Tensile Strength – ASTM D 412 200 psi min

Flexibility 1/4 inch mandrel – ASTM F 137 Pass

Thermal Conductivity – ASTM C 518 1.3 Btu-in/h-ft-F

Static Load Limit – ASTM F 970 @ 250PSI 0.025 inch

Coefficient of Friction – ASTM D 2047 >0.8

V.O.C. Compliant – ASTM D 5116 Yes

Color Stability – ASTM F-1515 Δ E <8.0

Chemical Resistance – ASTM F-925 Pass

Abrasion Resistance – ASTM D 3389 / EN649 <1g, 100 cycle

Resistance to Heat – ASTM F 1514 Δ E <8.0

Pill Test – ASTM D 2859 Pass

Vertical Deflection / Deformation – ASTM F 2772 1.6 mm Pass

Surface Effect Slip Resistance – ASTM F 2772 Pass

Ball Rebound – ASTM F 2772 100 %

Force Reduction – ASTM F 2772 40%

Thickness size tolerance plus or minus .02 inches

4 ft width size tolerance plus or minus 3/4 inch

Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.

Maintenance

Damp mop with a microfiber mop or auto-scrub using
an approved pad or nylon brush with E-Cleaner or neutral PH cleaner.

Shipping

Ships via freight delivery, shrink wrapped on pallets.

This Product Ships Freight Only.
Please review our shipping disclaimer.